UOP 425-86

UOP 425-86

Click here to purchase

This method is for determining the surface area of porous substances based upon the Brunauer-Emmett-Teller1 (B.E.T.) theory of multilayer adsorption through the use of measurements at two partial pressures using nitrogen as the adsorption gas. Pore volume is determined according to the capillary condensation theory.2 Pore diameter is calculated from surface area and pore volume. The method is limited to substances with surface areas greater than 10 m2/g and pore diameters less than 60 nm. This method uses barometric pressure as the reference pressure while UOP Method 821 is referenced to nitrogen saturation pressure. Therefore, surface areas determined by this method are typically as much as 10% lower than those produced by UOP 821.

Product Details

Published:
01/01/1986
Number of Pages:
13
File Size:
1 file , 78 KB

You may also like

UOP 1035-19

UOP 1035-19

Determination of Trace Chloromethane, Chloroethene, and Dichloromethane in Polymer Grade Ethylene and Propylene by Gas Chromatography Mass Spectrometrystandard by UOP...

UOP 1023-18

UOP 1023-18

Determination of Trace Arsine and Phosphine in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometrystandard by UOP LLC,...

UOP 1015-17

UOP 1015-17

Determination of Trace Oxygenates in Polymer Grade Ethylene & Propylene by Gas Chromatography Mass Spectrometrystandard by UOP LLC, A Honeywell...

UOP 1005-14

UOP 1005-14

Trace Metals in Organics by ICP-MSstandard by UOP LLC, A Honeywell Company, 03/01/2014

Back to Top