ULC 716.2

ULC 716.2

Click here to purchase
This Standard contains requirements for the installation of Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1.

This standard applies to the installation of the EIFS components and to the installation of the water resistive barrier system. It does not apply to the installation of the substrate.

This standard applies to the installation of EIFS for the cladding of walls and, with the exception of decorative projections, does not apply to the installation of EIFS on horizontal surfaces exposed to direct precipitation.

This standard does not address the qualifications and skills that an EIFS installer should possess.

This standard does not address the structural design or integrity of the substrate to which the EIFS is to be attached.

The use of mechanical fasteners is outside the scope of this Standard, but is acceptable as a complement and/or as an alternate to adhesive for attachment where the substrate will not support adhesive attachment of the EIFS.

Product Details

Edition:
2
Published:
2012

You may also like

ULC 701.1

ULC 701.1

Standard for Thermal Insulation, Polystyrene Boards (ULC S701.1)standard by Underwriters Laboratories of Canada, 02/25/2022

ULC 629

ULC 629

STANDARD FOR 650 °C FACTORY-BUILT CHIMNEYSstandard by Underwriters Laboratories of Canada, 04/07/2022

ULC 604

ULC 604

Standard for Factory-Built Type A Chimneysstandard by Underwriters Laboratories of Canada, 04/07/2022

ULC 628

ULC 628

Standard for Fireplace Inserts (ULC S628)standard by Underwriters Laboratories of Canada, 04/07/2022

Back to Top