TAPPI TIP 0304-56

TAPPI TIP 0304-56

Click here to purchase

In the process of making corrugated board, there are several steps in the process that require precise applications of pressure between rolls, or consistent gaps between rolls in order to meter precise amounts of adhesive to the flutes. In order for these requirements to be met, rolls have to be parallel to each other and also must be as close to perfectly round as possible. Bearings or journals must also be operating in such a manner as to allow the rolls to turn as close to perfect circular motion as possible.
If a pressure roll is not rotating in a perfectly round manner, then as the roll turns against the corrugating roll there will be areas where the pressure applied to the singlefacer web at the rolls’ nip point will be lessened. If the pressure is lessened enough, the singlefacer bond can be compromised and, thus, affect board quality. An adjustment to increase pressure to compensate for the problem could lead to another problem-pressure roll cutting of the medium and possibly box failure in compression and/or mullen (burst).

Product Details

Published:
06/30/2022
Number of Pages:
5
File Size:
1 file , 330 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus
TAPPI TIP 0304-56

TAPPI TIP 0304-56

Click here to purchase
In the process of making corrugated board, there are several steps in the process that require precise applications of pressure between rolls, or consistent gaps between rolls in order to meter precise amounts of adhesive to the flutes. In order for these requirements to be met, rolls have to be parallel to each other and also must be as close to perfectly round as possible.

If a pressure roll is not perfectly round, then as the roll turns against the corrugating roll there will be areas where the pressure applied to the singlefacer web at the rolls’ nip point will be lessened. If the pressure is lessened enough, the singlefacer bond can be compromised and, thus, affect board quality. An adjustment to increase pressure to compensate for the problem could lead to another problem-pressure roll cutting of the medium and possibly box failure in compression and/or mullen (burst).

Product Details

Published:
01/01/2009
Number of Pages:
4
File Size:
1 file , 54 KB
TAPPI TIP 0304-56

TAPPI TIP 0304-56

Click here to purchase
In the process of making corrugated board, there are several steps in the process that require precise applications of pressure between rolls, or consistent gaps between rolls in order to meter precise amounts of adhesive to the flutes. In order for these requirements to be met, rolls have to be parallel to each other and also must be as close to perfectly round as possible.If a pressure roll is not perfectly round, then as the roll turns against the corrugating roll there will be areas where the pressure applied to the singlefacer web at the rolls’ nip point will be lessened. If the pressure is lessened enough, the singlefacer bond can be compromised and, thus, affect board quality. An adjustment to increase pressure to compensate for the problem could lead to another problem-pressure roll cutting of the medium and possibly box failure in compression and/or mullen (burst).

Product Details

Published:
01/01/2005
Number of Pages:
3

You may also like

TAPPI T275 sp-23

TAPPI T275 sp-23

Screening of pulp (Somerville-type equipment)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

TAPPI TIP 0402-32

TAPPI TIP 0402-32

Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipmentstandard by Technical Association of the Pulp...

TAPPI T271 om-23

TAPPI T271 om-23

Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Lightstandard by Technical Association of the Pulp and...

TAPPI T 551 om-23

TAPPI T 551 om-23

Thickness of Paper and Paperboard (Soft Platen Method)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

Back to Top