TAPPI T656 cm-20

TAPPI T656 cm-20

Click here to purchase

This method presents procedures of white water evaluation so that different mills may use substantially the same procedures and thus establish a common basis of comparison. The complete method is intended to evaluate as accurately as possible paper mill white waters and to separate fibrous and nonfibrous constituents. For routine testing only those parts dealing with total solids, suspended and dissolved, correlated with rate of flow, for determination of inorganic and organic materials as mineral fillers, fibers, etc., may be adequate. The complete procedure, however, should serve as an excellent periodic check of routine methods. When checks are made, it is recommended that they cover periods of 1 to 2 weeks. 

This method is not intended for the analysis of environmental samples. Please refer to the proper published procedures designed for the analysis of environmental samples collected for regulatory purposes. If in doubt as to which method to choose, refer to the appropriate (Code of Federal Register) CFR reference for your samples.

Product Details

Published:
01/01/2020
Number of Pages:
5
File Size:
1 file , 250 KB

You may also like

TAPPI T275 sp-23

TAPPI T275 sp-23

Screening of pulp (Somerville-type equipment)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

TAPPI TIP 0402-32

TAPPI TIP 0402-32

Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipmentstandard by Technical Association of the Pulp...

TAPPI T271 om-23

TAPPI T271 om-23

Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Lightstandard by Technical Association of the Pulp and...

TAPPI T 551 om-23

TAPPI T 551 om-23

Thickness of Paper and Paperboard (Soft Platen Method)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

Back to Top