TAPPI T414 om-21

TAPPI T414 om-21

Click here to purchase

This method measures the force perpendicular to the plane of the paper required to tear multiple plies through a specified distance after the tear has been started using an Elmendorf-type tearing tester. It does not measure edge-tear resistance. The measured results may be used to calculate the approximate tearing resistance of a single sheet. It is not suitable for single-ply tear testing.

For highly directional boards and papers, prepare specimens according to T 496 “Specimen Preparation for Cross Directional Internal Tearing Resistance for Paper, Paperboard and Related Materials.” See section 8.5.

Caution is recommended in interpreting results from weakly bonded sheets, especially those containing lightly refined long-fibered chemical pulps. The low rate of tear when multiple plies are torn simultaneously may produce erroneously high results (1).

Product Details

Published:
01/01/2021
Number of Pages:
7
File Size:
1 file , 310 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

TAPPI T275 sp-23

TAPPI T275 sp-23

Screening of pulp (Somerville-type equipment)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

TAPPI TIP 0402-32

TAPPI TIP 0402-32

Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipmentstandard by Technical Association of the Pulp...

TAPPI T271 om-23

TAPPI T271 om-23

Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Lightstandard by Technical Association of the Pulp and...

TAPPI T 551 om-23

TAPPI T 551 om-23

Thickness of Paper and Paperboard (Soft Platen Method)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

Back to Top