TAPPI T265 cm-99

TAPPI T265 cm-99

Click here to purchase
The purpose of this method is to estimate the amount of natural (wood-derived) dirt in chips. The amount of dirt in the chips may be reflected in the level of dirt in the finished pulp or in bleaching and screening steps needed to produce an acceptable product. The determination is made by examining and classifying chips into categories defined by the ultimate contribution to dirt levels in the final product. For sulfite pulps from certain species, a dirt contribution values table (Table 1) is provided, which allows the results to be expressed in terms of an index based on square millimeters or equivalent area of black dirt (see TAPPI T 213 Dirt in Pulp.)

Product Details

Published:
10/10/1999
File Size:
1 file , 2.8 MB

You may also like

TAPPI T275 sp-23

TAPPI T275 sp-23

Screening of pulp (Somerville-type equipment)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

TAPPI TIP 0402-32

TAPPI TIP 0402-32

Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipmentstandard by Technical Association of the Pulp...

TAPPI T271 om-23

TAPPI T271 om-23

Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Lightstandard by Technical Association of the Pulp and...

TAPPI T 551 om-23

TAPPI T 551 om-23

Thickness of Paper and Paperboard (Soft Platen Method)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

Back to Top