TAPPI T 563 om-21

TAPPI T 563 om-21

Click here to purchase
This method uses image analysis to determine the level of dirt in pulp, paper, and paperboard in terms ofEquivalent Black Area (EBA) of dirt specks within the physical area range of 0.02 to 3.0 mm2 reported in parts per million as well as the number of dirt specks per square meter of sample. Using the algorithm prescribed in this method, the maximum dirt size is limited to 3.0 mm2. Extension to other speck sizes (for example those greater than 3.0 mm2 inphysical area), may require changes in equipment, calculation procedures, or both, and is not covered in this test method. This method cannot be used for physical area measurements since it does not correctly measure the dirt specks for that mode of measurement.

Product Details

Published:
01/01/2021
ANSI:
ANSI Approved
Number of Pages:
10
File Size:
1 file , 460 KB

You may also like

TAPPI T275 sp-23

TAPPI T275 sp-23

Screening of pulp (Somerville-type equipment)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

TAPPI TIP 0402-32

TAPPI TIP 0402-32

Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipmentstandard by Technical Association of the Pulp...

TAPPI T271 om-23

TAPPI T271 om-23

Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Lightstandard by Technical Association of the Pulp and...

TAPPI T 551 om-23

TAPPI T 551 om-23

Thickness of Paper and Paperboard (Soft Platen Method)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

Back to Top