SAE MAM2232C

SAE MAM2232C

Click here to purchase
This specification has been declared “CANCELLED” by the Aerospace Materials Division, SAE, as of June 2007, and has been superseded by AMS 2232. The requirements of the latest issue of AMS 2232 shall be fulfilled whenever reference is made to the cancelled MAM 2232. By this action, this document will remain listed in the Numercial Section of the Index of Aerospace Material Specifications noting that it is superseded by AMS 2232.

This specification covers established metric manufacturing tolerances applicable to carbon steel sheet, strip, and plate ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range. Tolerances for product sizes not listed herein shall be as agreed upon by purchaser and vendor.

AMS 2232 is the inch/pound version of this MAM.

Product Details

Published:
06/18/2007
File Size:
1 file , 170 KB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top