SAE J706_201711

SAE J706_201711

Click here to purchase
SAE J706_201711 applies only to new winches which are primarily designed for intermittent pullsand lifts and whose configuration and condition are the same as when they were shipped by the manufacturer.They are not intended to be used in any manner for the movement of personnel. They may be driven by anypower source recommended by the manufacturer and will be capable of being powered in either direction.They will be equipped with an automatic safety brake system to control a load when lowering under power andpositively hold a load when power is not being delivered to the winch. A hydraulic flow control valve or similardevice may be used in the brake system to control a load when lowering under power. A clutch to release thedrum for “free-spooling” may be provided and will be designed not to disengage itself under load. A drag brakemay be provided to control “free-spooling,” but will not be relied on to control or hold a load. Power sources,such as hydraulic motors, even though they may be supplied or recommended by the winch manufacturer, arenot considered a part of the winch so far as this document is concerned, except to whatever extent they are apart of the brake system.

Product Details

Published:
11/03/2017
File Size:
1 file , 780 KB
Redline File Size:
2 files , 3 MB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top