SAE J2181_201109

SAE J2181_201109

Click here to purchase

This test procedure is used to determine the steady-state directional control response of vehicles by measuring steady-state cornering behavior. Due to the wide range of operational conditions to which a vehicle can be subjected, the results of this testing do not provide a complete description of a vehicle’s total dynamic behavior; in particular, the procedure does not test the vehicle’s response during transient maneuvers. To fully assess a vehicle’s total dynamic behavior, it would be necessary to conduct other test procedures in order to evaluate the vehicle’s performance as a whole.

The extent of instrumentation and the required accuracy of the measurement will be dependent on the goals of the personnel conducting the test. If it is desired simply to determine the general performance characteristics of a vehicle, then this test can be conducted with minimal instrumentation and test item preparation.

Product Details

Published:
09/01/2011
File Size:
1 file , 990 KB
SAE J2181_201109

SAE J2181_201109

Click here to purchase
This test procedure is used to determine the steady-state directional control response of vehicles by measuring steady-state cornering behavior. Due to the wide range of operational conditions to which a vehicle can be subjected, the results of this testing do not provide a complete description of a vehicle’s total dynamic behavior; in particular, the procedure does not test the vehicle’s response during transient maneuvers. To fully assess a vehicle’s total dynamic behavior, it would be necessary to conduct other test procedures in order to evaluate the vehicle’s performance as a whole.

The extent of instrumentation and the required accuracy of the measurement will be dependent on the goals of the personnel conducting the test. If it is desired simply to determine the general performance characteristics of a vehicle, then this test can be conducted with minimal instrumentation and test item preparation.

This SAE Recommended Practice establishes a uniform procedure for determining the steady-state directional control response of trucks, buses, and combination vehicles.

Product Details

Published:
09/12/2011
File Size:
1 file , 990 KB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top