SAE J1947_200210

SAE J1947_200210

Click here to purchase
This SAE Information Report covers thin coatings of resinous based materials that can be placed on the metallic outer diameter of radial lip-type shaft seals to provide sealing when the mating bore finish is too rough to insure a proper seal (typically when finish exceeds 2.54 \gm r\da, or in pressurized applications).

The coatings will have the following characteristics: a.) material shall dry to a tough, flexible, and non-tacky film; b.) thickness typically ranges from 0.005 to 0.076 mm; c.) It shall not crack, flake or powder when scraped; d.) Coating shall adhere to seal case as noted in text; and e.) The sealer shall not show any evidence of peeling, blistering, softening or dissolution when tested in media to be sealed.

Product Details

Published:
10/25/2002
File Size:
1 file , 21 KB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top