SAE J1356_201303

SAE J1356_201303

Click here to purchase
This SAE Recommended Practice applies only to excavators, as defined in SAE J/ISO 6165, working above ground, near an excavated or free standing bank or mine face which is higher than the top of the cab, or in demolition applications of free standing buildings or objects higher than the top of the cab.

The evaluations are for resistance to penetration of guards to the point of infringement of the Deflection Limiting Volume (DLV, see SAE J397). The performance requirements of a representative specimen (that is, within the manufacturer’s specifications), are based on the performance of proven structures under laboratory evaluation procedures.

The areas protected include the top of the operator station (Top Guard), for protection from falling objects, and the front of the operator station (Front Guard), for protection from objects which approach the front of the cab.

Although falling object guards meeting the following criteria may not give crush protection under all conceivable circumstances in which the machine could be struck from above or the front, it is expected that crush protection will be ensured under at least the loading condition specified in the tests listed in Section 5.

This document establishes a consistent, repeatable test procedure and performance requirements for evaluating guards intended to provide excavator operators with reasonable protection from falling objects such as rocks.

Product Details

Published:
03/28/2013
File Size:
1 file , 1.3 MB
SAE J1356_201303

SAE J1356_201303

Click here to purchase

This SAE Recommended Practice applies only to excavators, as defined in SAE J/ISO 6165, working above ground, near an excavated or free standing bank or mine face which is higher than the top of the cab, or in demolition applications of free standing buildings or objects higher than the top of the cab.

Product Details

Published:
03/01/2013
File Size:
1 file , 1.3 MB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top