PIP VEDSP003

PIP VEDSP003

Click here to purchase

This Practice provides data forms and the associated instructions for specifying requirements for shell and plate heat exchangers constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.
This Practice contains four data forms for providing requirements for cylindrical heat exchangers having internal design pressures equal to or greater than 15 psig (103 kPa) and/or full vacuum external pressure at the top of the exchanger in its normal operating position, and are welded, shop- and field-fabricated, and in accordance with the requirements of the Code, Section VIII, Division 1 {or Division 2}.
This Practice is required to be used with PIP VECV1001, PIP VESV1002, PIP VECSP001, and PIP VESSP002 to specify requirements, not otherwise specified, that are required by manufacturer to design and fabricate an exchanger.
This Practice also provides instructions to purchaser and manufacturer for inserting data and information in the data forms.

Product Details

Published:
03/01/2022
Number of Pages:
38
File Size:
1 file , 1.1 MB
Note:
This product is unavailable in Ukraine, Russia, Belarus
PIP VEDSP003

PIP VEDSP003

Click here to purchase
This Practice provides data forms and the associated instructions for specifying requirements for shell and plate heat exchangers constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.

This Practice contains four data forms for providing requirements for cylindrical heat exchangers having internal design pressures equal to or greater than 15 psig (103 kPa) and/or full vacuum external pressure at the top of the exchanger in its normal operating position, and are welded, shop- and field-fabricated, and in accordance with the requirements of the Code, Section VIII, Division 1 {or Division 2}.

This Practice is required to be used with PIP VECV1001, PIP VESV1002, PIP VECSP001, and PIP VESSP002 to specify requirements, not otherwise specified, that are required by Manufacturer to design and fabricate an exchanger.This Practice also provides instructions to Purchaser and Manufacturer for inserting data and information in the data forms.

Product Details

Published:
11/01/2014
Number of Pages:
37
File Size:
1 file , 490 KB

You may also like

PIP PN01LT0F01

PIP PN01LT0F01

Piping Material Specification 1LT0F01, Class 150, Flanged, PTFE-Lined Carbon Steel Process [Complete Revision]standard by Process Industry Practices, 10/01/2022

PIP PN01SD1B01

PIP PN01SD1B01

Piping Material Specification 1SD1B01 Class 150, 316/316L Stainless Steel, 0.063" C.A. Process [Complete Revision]standard by Process Industry Practices, 11/01/2022

PIP CVS02350

PIP CVS02350

Roadway and Area Paving Construction Specification [Complete Revision]standard by Process Industry Practices, 10/01/2022

PIP ELEGL09

PIP ELEGL09

Electrical Power System Event Reporting Guideline [New Practice]standard by Process Industry Practices, 11/01/2022

Back to Top