NACE MR0175-2000

NACE MR0175-2000

Click here to purchase
This standard presents metallic material requirements for resistance to sulfide stress cracking(SSC) for petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard is applicable to the materials and/or equipment specified by the materials standards institutions listed in Table 7 (or by equivalent standards or specifications of other agencies). This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower-strength steels used for pipelines and vessels may be subjected to failure by blister cracking or hydrogen-induced (stepwise) cracking as a result of hydrogen damage associated with general corrosion in the presence of H2S.

Product Details

Published:
01/01/2000
ISBN(s):
1575900211
Number of Pages:
41
File Size:
1 file , 390 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

NACE SP0112-2023

NACE SP0112-2023

Corrosion Management System for Atmospherically Exposed Reinforced Concrete Structuresstandard by National Association of Corrosion Engineers, 04/19/2023

NACE G193-09

NACE G193-09

Standard Terminology and Acronyms Relating to Corrosionstandard by National Association of Corrosion Engineers, 07/01/2009

NACE SP0492-2006

NACE SP0492-2006

Standard Practice - Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodesstandard by National Association of Corrosion Engineers, 07/18/2006

NACE RP0189-2002

NACE RP0189-2002

Standard Recommended Practice - On-Line Monitoring of Cooling Watersstandard by National Association of Corrosion Engineers, 12/19/2002

Back to Top