AASHTO M 285M/M 285-22

AASHTO M 285M/M 285-22

Click here to purchase

This specification covers iron-chromium-nickel alloy, stainless steel castings intended for particularly severe corrosive applications.

This specification requires postweld heat treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which postweld heat treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to AASHTO M 163M/M 163.

For general corrosion-resistant alloy castings, reference should be made to AASHTO M 163M/M 163. For general heat-resistant alloy castings, reference should be made to ASTM A297/A297M. For nickel-base alloy castings, refer to ASTM A494/A494M.

The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. SI units are applicable for material ordered to M 285M and inch-pound units for material ordered to M 285.

Product Details

Published:
2022
Number of Pages:
10
Units of Measure:
Dual
File Size:
1 file , 580 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

AASHTO M 322M/M 322-22

AASHTO M 322M/M 322-22

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement (ASTM Designation: A996/A996M-16)standard by American Association of State and...

AASHTO PP 94-22

AASHTO PP 94-22

Standard Practice for Determination of Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphaltstandard by American Association of State...

AASHTO M 235M/M 235-22

AASHTO M 235M/M 235-22

Standard Specification for Epoxy Resin Adhesives (ASTM Designation: C881/C881M-20a)standard by American Association of State and Highway Transportation Officials, 2022

AASHTO R 70M/R 70-22

AASHTO R 70M/R 70-22

Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM...

Back to Top