AASHTO T 215-22

AASHTO T 215-22

Click here to purchase

This method describes a procedure for the determination of the permeability of water through granular (cohesionless) soils in a steady-state condition.

The determination of the coefficient of permeability, k, as defined in this method, was developed under the assumptions of the validity of Darcy’s Law, which states that the coefficient of permeability is the ratio of the flow rate to the hydraulic gradient.

This test procedure is intended for use with disturbed granular soils containing less than 10 percent by mass of the material passing the 75-μm (No. 200) sieve. Soil materials with greater than 10 percent by mass of the material passing the 75-μm (No. 200) sieve are subject to consolidation effects that may influence the outcome of the test results. Permeability of fine-grained and cohesive soils should be performed by use of a flexible wall permeameter test procedure, such as ASTM D5084.

Two methods of test, Method A and Method B, are provided. The method used is dependent on the permeameter used to complete testing.

Product Details

Published:
2022
Number of Pages:
15
File Size:
1 file , 1000 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

AASHTO M 322M/M 322-22

AASHTO M 322M/M 322-22

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement (ASTM Designation: A996/A996M-16)standard by American Association of State and...

AASHTO PP 94-22

AASHTO PP 94-22

Standard Practice for Determination of Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphaltstandard by American Association of State...

AASHTO M 235M/M 235-22

AASHTO M 235M/M 235-22

Standard Specification for Epoxy Resin Adhesives (ASTM Designation: C881/C881M-20a)standard by American Association of State and Highway Transportation Officials, 2022

AASHTO R 70M/R 70-22

AASHTO R 70M/R 70-22

Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM...

Back to Top