AASHTO T 348-22

AASHTO T 348-22

Click here to purchase

This test method covers the determination of characteristics of the air-void system of fresh concrete using a sample of mortar. Spacing factor, specific surface, and entrained air content are determined by capturing air bubbles released from a mortar sample.

The sample will only be representative of the depth of the concrete within approximately 60 mm (2.5 in.) below the level at which the sampling is begun. This method is applicable to fresh concrete with a minimum slump of 10 mm (0.4 in.) and air content between 3.5 and 10 percent by volume. Only air voids less than 3 mm (0.1 in.) in diameter are measured by this method. The test must be performed in sheltered, stable conditions.

This standard was formerly designated as provisional standard TP 75.

Product Details

Published:
2022
Number of Pages:
13
File Size:
1 file , 1.1 MB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

AASHTO M 322M/M 322-22

AASHTO M 322M/M 322-22

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement (ASTM Designation: A996/A996M-16)standard by American Association of State and...

AASHTO PP 94-22

AASHTO PP 94-22

Standard Practice for Determination of Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphaltstandard by American Association of State...

AASHTO M 235M/M 235-22

AASHTO M 235M/M 235-22

Standard Specification for Epoxy Resin Adhesives (ASTM Designation: C881/C881M-20a)standard by American Association of State and Highway Transportation Officials, 2022

AASHTO R 70M/R 70-22

AASHTO R 70M/R 70-22

Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM...

Back to Top