AASHTO T 361-22

AASHTO T 361-22

Click here to purchase

This test method quantifies the tensile force needed to remove a pull-off stub adhered to a solid substrate with asphalt binder. Samples are prepared at controlled environmental and moisture conditions (i.e., temperature and humidity). After conditioning, a pneumatic load is applied to a pull-off stub using an ASTM D4541 Type IV adhesion tester until failure. The pull-off tensile strength and mode of failure are used to describe the bonding properties of the asphalt binder and compatibility between aggregates and asphalt binders.

This standard was formerly designated as provisional standard TP 91.

Product Details

Published:
2022
Number of Pages:
15
File Size:
1 file , 1000 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

AASHTO M 322M/M 322-22

AASHTO M 322M/M 322-22

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement (ASTM Designation: A996/A996M-16)standard by American Association of State and...

AASHTO PP 94-22

AASHTO PP 94-22

Standard Practice for Determination of Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphaltstandard by American Association of State...

AASHTO M 235M/M 235-22

AASHTO M 235M/M 235-22

Standard Specification for Epoxy Resin Adhesives (ASTM Designation: C881/C881M-20a)standard by American Association of State and Highway Transportation Officials, 2022

AASHTO R 70M/R 70-22

AASHTO R 70M/R 70-22

Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM...

Back to Top