IEC 60335-2-21 Ed. 7.0 b:2022

IEC 60335-2-21 Ed. 7.0 b:2022

Click here to purchase

This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.
This standard also deals with:
– appliances not intended for normal household use, but which nevertheless possibly pose a source of danger to the public, such as appliances intended to be used by laymen in shops and on farms;
– immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Additional requirements are given in Annex AA.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account
– persons (including children) whose
• physical, sensory or mental capabilities, or
• lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction;
– children playing with the appliance.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
– in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities;
– in many countries regulations exist for the installation of equipment connected to the water mains.
This standard does not apply to
– appliances for boiling water (IEC 60335-2-15);
– instantaneous water heaters (IEC 60335-2-35);
– commercial dispensing appliances and vending machines (IEC 60335-2-75);
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).

Product Details

Edition:
7.0
Published:
10/01/2022
ISBN(s):
9782832258583
Number of Pages:
62
File Size:
1 file , 920 KB
Note:
This product is unavailable in Ukraine, Russia, Belarus

You may also like

IEC 62561-1 Ed. 3.0 b:2023

IEC 62561-1 Ed. 3.0 b:2023

Lightning protection system components (LPSC) - Part 1: Requirements for connection componentsstandard by International Electrotechnical Commission, 03/01/2023

IEC 62386-253 Ed. 1.0 b:2023

IEC 62386-253 Ed. 1.0 b:2023

Digital addressable lighting interface – Part 253: Particular requirements – Diagnostics and maintenance (device type 52)standard by International Electrotechnical Commission,...

IEC 61158-5-4 Ed. 4.0 en:2023

IEC 61158-5-4 Ed. 4.0 en:2023

Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 elementsstandard by International Electrotechnical...

IEC 60601-2-2 Ed. 6.1 b:2022

IEC 60601-2-2 Ed. 6.1 b:2022

Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment...

Back to Top