TAPPI T 556 om-21

TAPPI T 556 om-21

Click here to purchase

This procedure is used to measure the bending resistance of paper and paperboard in the machine and cross machine directions, by determining the bending resistance in mN of a 38 mm (1.5 in.) wide vertically clamped sample, at 15° or 7.5° deflection. For this method the standard bending angle is 15 ± 0.1°. For specimens that break or are otherwise unsuitable at 15° a bending angle of 7.5 ± 0.1° shall be used.

Product Details

Published:
2021
Number of Pages:
5
File Size:
1 file , 270 KB

You may also like

TAPPI T275 sp-23

TAPPI T275 sp-23

Screening of pulp (Somerville-type equipment)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

TAPPI TIP 0402-32

TAPPI TIP 0402-32

Guidelines for Thermal Spray Coatings Installed to Prevent Corrosion in Pulp Mill Process Equipmentstandard by Technical Association of the Pulp...

TAPPI T271 om-23

TAPPI T271 om-23

Fiber Lenth of Pulp and Paper by Automated Optical Analyzer Using Polarized Lightstandard by Technical Association of the Pulp and...

TAPPI T 551 om-23

TAPPI T 551 om-23

Thickness of Paper and Paperboard (Soft Platen Method)standard by Technical Association of the Pulp and Paper Industry, 06/01/2023

Back to Top