FCI 70-3-2015

FCI 70-3-2015

Click here to purchase
Order 70-3 as a set with 70-2 and save!

This standard applies to pilot operated and direct acting pressure reducing, pressure relieving (back pressure), differential pressure and temperature regulators.
Selection of a leakage class is not restricted as to regulator design, but acceptable values for various commercially available designs are suggested for each class under Section 4.
The standard cannot be used as a basis for predicting leakage at conditions other than those specified.
This standard is similar to FCI 70-2.
This standard does not apply to pressure regulators as defined in the following standards:
– ANSI Z21.18/CSA 6.3
– ANSI Z21.80/CSA 6.22
– ANSI Z21.78/CSA 6.20

Product Details

Published:
2015
ANSI:
ANSI Approved
Number of Pages:
10
File Size:
1 file , 67 KB

You may also like

FCI 20-1-2023

FCI 20-1-2023

Standard for Performance Testing Strainers for Liquid Servicestandard by Fluid Controls Institute, 2023

FCI 19-2-2022

FCI 19-2-2022

Standard for Installation of Type 2 Secondary Pressure Drainersstandard by Fluid Controls Institute, 2022

FCI 13-1-2022

FCI 13-1-2022

Determining Condensate Loads to Size Steam Trapsstandard by Fluid Controls Institute, 2022

FCI 69-1-2022

FCI 69-1-2022

Pressure Rating Standard for Steam Trapsstandard by Fluid Controls Institute, 05/01/2022

Back to Top