AASHTO TP 91-15

AASHTO TP 91-15

Click here to purchase
This test method quantifies the tensile force needed to remove a pull-off stub adhered to a solid substrate with asphalt binder. Samples are prepared at controlled environmental and moisture conditions (i.e., temperature and humidity). After conditioning, a pneumatic load is applied to a pull-off stub using an ASTM D4541 Type IV adhesion tester until failure. The pull-off tensile strength and mode of failure are used to describe the bonding properties of the asphalt binder and compatibility between aggregates and asphalt binders.

Product Details

Published:
2015
Number of Pages:
14
File Size:
1 file , 4.1 MB

You may also like

AASHTO M 322M/M 322-22

AASHTO M 322M/M 322-22

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement (ASTM Designation: A996/A996M-16)standard by American Association of State and...

AASHTO PP 94-22

AASHTO PP 94-22

Standard Practice for Determination of Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphaltstandard by American Association of State...

AASHTO M 235M/M 235-22

AASHTO M 235M/M 235-22

Standard Specification for Epoxy Resin Adhesives (ASTM Designation: C881/C881M-20a)standard by American Association of State and Highway Transportation Officials, 2022

AASHTO R 70M/R 70-22

AASHTO R 70M/R 70-22

Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete (ASTM...

Back to Top