SAE AMS3277G

SAE AMS3277G

Click here to purchase
This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two component system which cures at room temperature.

This product has been used in aircraft integral fuel tanks for repair of fillet and fastener seals and faying surface seals as well as initial sealing of faying surfaces, overcoating of fasteners, and sealing of seams and joints, for service from -80 to +320\mDF (-62 to +160\mDC), with short-term recurring exposures (approximately six hours) up to 360\mDF (182\mDC), but usage is not limited to such applications. This product is not recommended for use on aircraft windshields or canopies or other applications where crazing or degradation of plastic components may occur. Sealing compound must be applied at temperatures above 50\mDF (10\mDC), but will cure at lower temperatures.

Product Details

Published:
11/20/2012
File Size:
1 file , 200 KB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top