SAE J1849_198907

SAE J1849_198907

Click here to purchase
This SAE Recommended Practice provides laboratory test procedures, requirements and guidelines for electronic siren systems with a single loudspeaker, and electromechanical sirens for use on authorized emergency vehicles, which call for the right-of-way. This document is applicable only to such sirens that have all dimensions across the sound-emitting opening equal to or less than 0.5 m. Test procedures and performance requirements for individual system components are not included in this version. Data obtained from measurements of siren performance depend not only on the characteristics of the siren tested, but additionally on the test procedures and the characteristics of the measurement instrumentation and test environment. These additional factors must be well defined and controlled to obtain reliable data. Detailed test methods are described here, which include specifications for a laboratory environment, to minimize the measurement uncertainty and obtain accurate and reproducible measurement results. Such results are necessary to qualify the performance of all sirens as equally as practicable. Requirements have been established based on the laboratory-measured performance of sirens that have been effective in emergency service.

Product Details

Published:
07/01/1989
File Size:
1 file , 2.1 MB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top