SAE J3045_201507

SAE J3045_201507

Click here to purchase

This SAE recommended practice establishes a uniform, powered vehicle T.P. for lane departure warning systems used in highway trucks and buses greater than 4,546 kg (10,000 lb) GVW. Systems similar in function but different in scope and complexity, including Lane Keeping/Lane Assist and Merge Assist, are not included in this T.P. This T.P. does not apply to trailers, dollies, etc. This T.P. does not intend to exclude any particular system or sensor technology.

The specification will test the functionality of the LDWS (e.g., ability to detect lane presence, and ability to detect an unintended lane departure), its ability to indicate LDWS engagement, its ability to indicate LDWS disengagement, and determine the point at which the LDWS notifies the Human Machine Interface (HMI) or vehicle control system that a lane departure event is detected. The HMI is not addressed herein, but is considered in SAE Standard J2808.

Product Details

Published:
07/01/2015
File Size:
1 file , 620 KB
SAE J3045_201507

SAE J3045_201507

Click here to purchase
This SAE recommended practice establishes a uniform, powered vehicle T.P. for lane departure warning systems used in highway trucks and buses greater than 4,546 kg (10,000 lb) GVW. Systems similar in function but different in scope and complexity, including Lane Keeping/Lane Assist and Merge Assist, are not included in this T.P. This T.P. does not apply to trailers, dollies, etc. This T.P. does not intend to exclude any particular system or sensor technology. The specification will test the functionality of the LDWS (e.g., ability to detect lane presence, and ability to detect an unintended lane departure), its ability to indicate LDWS engagement, its ability to indicate LDWS disengagement, and determine the point at which the LDWS notifies the Human Machine Interface (HMI) or vehicle control system that a lane departure event is detected. The HMI is not addressed herein, but is considered in SAE Standard J2808.

Product Details

Published:
07/30/2015
File Size:
1 file , 620 KB

You may also like

SAE J2862_202305

SAE J2862_202305

User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)standard by SAE International, 05/22/2023

SAE AS22520/48A

SAE AS22520/48A

CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8standard by...

SAE AS4832B

SAE AS4832B

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Sealsstandard by SAE International, 06/12/2023

SAE AS7477J

SAE AS7477J

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specificationstandard by SAE International, 08/01/2023

Back to Top